Hardware⏱️ 3 min read📅 2026-05-26

How to Fix: Stuck in a boot loop

Stuck in boot loop after BIOS update, try removing power supply or replacing it with a known good one.


The 'stuck in a boot loop' error occurs when the computer becomes stuck on the boot screen, repeatedly attempting to load an Complete Guide">operating system or boot device. This issue can be caused by a faulty BIOS update, corrupted system files, or incorrect configuration settings.

⚠️ Common Causes

  • Incorrectly installed BIOS update
  • Corrupted system files or registry entries
  • Conflicting device drivers or hardware settings

🛠️ Step-by-Step Verified Fixes

Method 1: BIOS Reset

  1. Step 1: Unplug all cables and power the computer off.
  2. Step 2: Press and hold the power button for 30 seconds to discharge any residual power.
  3. Step 3: Release the power button, plug in the power cord, and press the power button again to enter the BIOS setup.

Method 2: System File Checker

  1. Step 1: Insert the Windows installation media (USB or CD/DVD) and restart the computer.
  2. Step 2: Enter the boot options by pressing F12, F9, or Shift+F10 and select the installation media.
  3. Step 3: Run the System File Checker tool to scan and repair any corrupted system files.

Method 3: Safe Mode Boot

  1. Step 1: Restart the computer and press the F8 key repeatedly until you see the Advanced Boot Options menu.
  2. Step 2: Select Safe Mode with Networking and press Enter to boot into Safe Mode.
  3. Step 3: If the computer boots successfully in Safe Mode, it may indicate a driver or software issue that needs to be addressed.

💡 Conclusion

If none of the above methods resolve the issue, it's possible that there is a hardware problem or a more complex configuration issue. In this case, seeking professional assistance from a qualified IT technician may be necessary to diagnose and repair the problem.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions